Cheetah
Tech Support
Follow these instructions to install a dial-up connection for Macintosh OSX:
1.Open your System Preferences and double click the Network icon.
2. Under "Network Port Configurations" make sure that you have a Modem Port listed and that the checkbox beside it is checked.
3. In the dropdown box beside Show:, select Modem Port.
4. On the TCP/IP tab, make sure Configure is set to Using PPP.
5. Click the PPP tab. Enter the information as follows:
Service Provider: Any fitting name (i.e. "Pony Express")
Account Name: (This is your account name for dialup access, it will vary by user. Please contact the tech support if you need assistance.)
Password: (Your password)
Telephone Number: Type the number you will dial when connecting to Pony Express. If you are not sure which number to use, see the list below:
St. Joseph: 3908873
Gallatin: 6632167
Savannah: 3247200
Albany: 7263303
Atchison: 3674155
Cameron: 6324921
Alternate Number: (leave blank)
6. Click the button marked PPP Options and the options dialog will appear. Select Send PPP echo packets and Use TCP header compression. Click OK to close the options dialog. Click Apply Now to finish PPP setup.
7. You have successfully created the Dial-up connection for Pony Express. To make a connection, navigate to your Applications folder and double click Internet Connect.
HOME